01406 351244

Display Polyester

The top-selling 210gsm Display Polyester

Material Overview

  • 210gsm Textile
  • Dye-sublimation printed for vibrant colours and images
  • M1/B1 fire-rated to comply with UK and European fire safety standards
  • Standard finishing included at no extra charge
  • Approx maximum finished graphic width: 3000mm (depending on chosen finish)
  • Roll width: 3200mm

Each item is printed and finished to your requirements.

Fabrics are printed via a process of dye-sublimation which uses special inks and undergoes a post-print heating process to fix the ink into the fabric. This makes it both scuff-resistant and washable.

Uses for Backlit Polyester

  • Exhibition graphics
  • SEG (Silicone Edge Graphics)
  • Display frames
  • Retail graphics
  • Tablecloths
  • Suitable for both indoor and outdoor use

Artwork

For any Display Polyester items, 50mm bleed must be supplied. This allows for any extra material required for hems, as well as shrinkage and movement when printing and cutting.

Notice

While Display Polyester is a tight-knit fabric, some light show-through is possible when light sources are behind the fabric.

Display Polyester items are supplied folded in polybags. Any creases can be ironed out or will drop out when the fabric is tensioned.

Our thread colours are black or white. Our sewists will choose the most appropraite colour to complement your graphic.

Currently we can only print up to 3.2 metres (10ft 6in) on the shortest edge, to our standard pricing. Flags above this size will require a bespoke quotation.

Finishes for Display Polyester

  • Finish Image - hems and eyelets flag

    Stitched Hems & Eyelets

    Graphics will be given a stitched hem, then eyeletted at equal distributions along the hem. Eyelets are clear plastic.

    The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that is no problem at all - simply let us know what you need when you place your order.

    There is no charge for this finish.

  • Finish Image - hems flag

    Stitched Hems Only

    Graphics will be given a stitched hem.

    There is no charge for this finish.

  • Finish Image - velcro

    Stitched Hems with Velcro

    Graphics will be stitched to a strip of either hook or loop edging. Please specify which is required when ordering.

    A variety of widths are available - please contact us to discuss your requirements.

    Black or white strips are available. Our sewists will choose the most appropraite colour to complement your graphic, unless specifically requested.

    There is an additional charge for this finish.

  • Finish Image - pole pockets

    Pole Pocket(s)

    A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.

    The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.

  • Finish Image - seg flag

    Trimmed with Silicone Edging (Kedar)

    Graphics will be stitched to a strip of silicone edging, suitable for exhibition tension frames.

    14mm wide silicone will be used as standard, unless otherwise requested.

    There is no charge for this finish.